Want to buy one of our ECOWA valves?
To determine which size ECOWA valve to buy from us, you will need to examine and determine what is the Diameter of your water supply pipe coming off YOUR SIDE of your water meter. That Diameter determines and needs to match whether you’ll need a ½”, ¾”, 1”, 1 ½”, 2” or 3” valve. You will find prices of each of these valve sizes and how to purchase one below. (In cases of having water rationing and/or lower water delivery pressure than 40PSI, please order and install the ECOWA valve size next larger than your existing water supply pipe.)
How to Install your new ECOWA valve?
You should hire your regular licensed plumber to install your new valve. Your plumber needs to insert your new valve on the supply pipe on YOUR SIDE of your water meter, AS CLOSE AS POSSIBLE to your water meter, but no closer than 6” to the meter (and never more than 10’ away from your meter). A straight pipe should be between the meter and our valve AND a straight pipe should exist for at least 6” after our valve and before/ahead of any elbows, other valves and/or double-check valves or other accessories. Do Not install our valve after (between the meter and our valve) an elbow, shut-off valve (unless it is 100% open after the install) or other valves or double-check valves or any other accessories. A free flow of water between the water meter and the ECOWA valve is strictly required. Do Not over-tighten the valve on either end of the valve, so as to prevent cracking during the installation. Do Not apply contrary torque between the two ends of the ECOWA valve as it could break apart; always apply torque in the same/one direction. If the male thread outside the ECOWA valve is of copper or galvanized, applying too much torque may break the ECOWA valve. Your plumber needs to MAKE SURE that the arrow on the label on your new ECOWA valve will be pointing in the direction that the water is flowing towards – the arrow points to where the water is moving! Make sure that the ECOWA valve sits horizontally only. In most all cases, the size of your new valve needs to match the size of the water supply pipe on YOUR SIDE of your water meter.
ECOWA VALVE -- PRICE LIST
Prices per unit for each pipe size
½” $49.99
¾” $139.99
1” $570.00
1 ½” $650.00
2” $970.00
3” $1,300.00
(Larger size valves are under development as of September, 2017)